Engineering, 17.05.2021 20:00 maraa013001

Question #3 Multiple Choice
What is the following passage saying about the relationship between sustainability and responsibility?
How green is Green? When we brand certain products or services as "green," "renewable," or "sustainable," that label can't just consider
those products or activities along a single axis. A biofuel that doesn't depend on petroleum to produce and refine but that requires
massive overproduction of certain crops which wreck the water table is not "green." A process that relies on production that is local but
also wasteful is not "green."
Sustainability is not just about he thing but about many things coming together.
o We should only consider products or services to be green if their broad impact can be considered so.
O We should not market products and services as green, renewable, or sustainable.
It is likely that no product or service is really green if we carefully consider its ramifications,

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

Answer

You know the right answer?

Question #3 Multiple Choice
What is the following passage saying about the relationship betwe...

Questions