Select a chain drive to transmit 2.5Kw from a gearbox running at 130 rev/min and driven by a direction on line electric motor to a uniformly loaded conveyor drive shaft which is required to run at approximately 60 rev/min for 16hours per day , gearbox output shaft is 45mm and the head shaft is 75mm diameter

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way