Engineering, 11.05.2021 06:20 cchavcchav9606

6. Equipment used to perform welding operation A. disc cutter
B. grinder
C. hand drill .D. welding machine
7. An equipment used for operations like drilling, reaming, tapping, spot facing etc.
A. fixtures
B. jigs
C. positioner D. welding machine
8. A mechanical device which is used to hold the Job and move them according to their required positio
to weld and do other operations.
A. power source
B. jigs
C. positioner D. wrench
9. An equipment used for operations like milling, boring, turning, broaching ,slotting, grinding etc.
A. fixtures
B. jigs
C. positioner D. welding machine
10. It is single axis rotating device which rotates the table along horizontal axis either in clockwise or
anti-clockwise direction.
A. headstock and tailstock
C. turning rolls
B. turn table
D. tilting rotating
11. Provide the voltage necessary to maintain an arc between the electrode and the workpiece and a
sufficient supply of electric current.
A. fixtures
B. jigs
C. positioner D. welding Power Source
12. Conduct the welding current from the power source to the work.
A. cables B. electrode holder C. positioner D. welding Power Source
13. Used to grip the electrode.
A. cables B. electrode holder
C. positioner
D. welding Power Source

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

You know the right answer?

6. Equipment used to perform welding operation A. disc cutter
B. grinder
C. hand drill .D...

Questions