Engineering, 06.05.2021 21:00 djennings8055
The stamping division at Bass Auto Works performs all necessary metal stamping operations for body panels. This is a 16 hour/day, 240 days/year operation. Currently, there are 30 stamping lines. Data on the breakdown and repair times of the lines has been analyzed by a group of Senior Design Students at State College. They determined that it was reasonable to assume that both are exponentially distributed. The mean time to failure for a single stamping line was found to be about 6.5 hours. The division currently employs 4 repairmen who work in teams of 2. When a stamping line breaks down, a single team is sent to repair it. The average repair time for a stamping line is about 4 hours.
Required:
a. Develop a model for this system. Define states and events. The line feeds body panels to the main assembly process. A fully operational stamping line produces body panels at a rate of about 10/hour.
b. For this system, how many body panel, on average, are produced per hour? Suppose that body panels are needed in assembly at a rate of about 112/hour. The cost of not meeting the production requirements is extremely high and to be avoided at all cost.
c. How many repair crew is needed to meet the assembly demand?
Answers: 2
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
The stamping division at Bass Auto Works performs all necessary metal stamping operations for body p...
Mathematics, 15.07.2019 11:30
Social Studies, 15.07.2019 11:30
Mathematics, 15.07.2019 11:30
Business, 15.07.2019 11:30
Business, 15.07.2019 11:30
Chemistry, 15.07.2019 11:30
Mathematics, 15.07.2019 11:30
Chemistry, 15.07.2019 11:30