If the center of dilation is the origin in the diagram below, what would be the scale factor? M м
L'
KO
ML
5. Which of the following explains a scale factor?
A. The distance between the two images,
D. The coordinate pair of the center of dilation
C. The number by which the distance from the center of dilation to an image is added to obtain
a similar image as measured from its center of dilation.
D. The number by which the distance from the center of dilation to an image is multiplied to
obtain a similar image as measured from its center of dilation

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]