Engineering, 29.04.2021 19:00 maribel2421
An orthogonal cut 3.18 mm wide is made at a speed of 33.5 m/min and feed of 0.25 mm/rev with a high-speed steel tool having a rake angle of 18o. The chip thickness ratio is 0.58, the cutting force is 1379 N, and its associated normal force Ft is 356 N. Determine the Chip thickness Shear plane angle Magnitude of the resultant force Coefficient of friction on the face of the tool Magnitude of the friction force and associated normal force Magnitude of the shearing force and associated normal force Specific energy
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
An orthogonal cut 3.18 mm wide is made at a speed of 33.5 m/min and feed of 0.25 mm/rev with a high-...
Questions
Mathematics, 25.02.2021 01:00
Chemistry, 25.02.2021 01:00
English, 25.02.2021 01:00
Mathematics, 25.02.2021 01:00
Mathematics, 25.02.2021 01:00
English, 25.02.2021 01:00
Computers and Technology, 25.02.2021 01:00
Chemistry, 25.02.2021 01:00
Mathematics, 25.02.2021 01:00
History, 25.02.2021 01:00
