Engineering, 28.04.2021 14:00 dessyrob05

Briefly identify the advantages and disadvantages of wind power in urban environments. (4 marks)
b. Wind approaches a wind turbine at 17m/s and leaves at 8.5 m/s. If the turbine has a
blade diameter of 25m, determine the turbine power and the coefficient of
3 performance. Air density 1.2 kg/m .
(7 marks)
c. The wind approaching and passing through a turbine takes a tubular form. Explain why the wind tube expands on the downstream side of the turbine blades. If a turbine has a blade diameter of 20m and has approaching and leaving velocities of 15m/s and 8m/s, what will be the cross sectional area of the expanded downstream wind tube?
( 3 marks)
d. The tip speed of a horizontal axis turbine is 70m/s and the blade swept area has a circumference of 78.5m. Determine :
i. Blade diameter
ii. Rotational speed of turbine blades in rpm (revolutions/minute)
iii. Volume flow of air approaching the turbine if the tip speed ratio is 8
iv. The turbine power delivered if the interference factor is 1/3 and the overall
efficiency of the system is 0.4
(6 marks)

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

You know the right answer?

Briefly identify the advantages and disadvantages of wind power in urban environments. (4 marks)

Questions