Engineering, 25.04.2021 20:40 littlesami105
water is flowing uniformly in a finished - concrete channel of trapezoidal cross section with a bottom width of 0.8 m, side slope of 1 : 1 and the bottom slop of 0.0001. if the flow depth is measured to be 0.52 m, determine the flow rate of water through the channel.[take the meaning coefficient of the finished concrete as 0.012]​
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
water is flowing uniformly in a finished - concrete channel of trapezoidal cross section with a bott...
Mathematics, 10.02.2020 19:44
English, 10.02.2020 19:44
Social Studies, 10.02.2020 19:44
Social Studies, 10.02.2020 19:44
History, 10.02.2020 19:45
History, 10.02.2020 19:45
Social Studies, 10.02.2020 19:45