subject
Engineering, 20.04.2021 22:00 22savage2017

Aculvert to pass a 25-year peak runoff rate of 0.2 m3/s under a roadway. The headwater depthis 1.70 m; the inlet and the outlet channels are both trapezoidal with bottom widths of 2 m, side slope of 2:1 (H:V), lined with riprap, and have a longitudinal slopeof 0.1%. Local drainage regulations require a minimum culvert diameter of 455 mm. (a) What is the minimum required diameter for a Type 2 flow

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
question
Engineering, 04.07.2019 18:10
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
Aculvert to pass a 25-year peak runoff rate of 0.2 m3/s under a roadway. The headwater depthis 1.70...
Questions