Engineering, 18.04.2021 01:00 mandoux
The length of a pipe with 1 T = 12.155’ ft e/c . What is e/e length if the fitting allowance is 1 3/4”inch
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
The length of a pipe with 1 T = 12.155’ ft e/c . What is e/e length if the fitting allowance is 1 3/...
Mathematics, 10.12.2021 21:20
Mathematics, 10.12.2021 21:20
Social Studies, 10.12.2021 21:20
Arts, 10.12.2021 21:20
Social Studies, 10.12.2021 21:20
Mathematics, 10.12.2021 21:20
Mathematics, 10.12.2021 21:20
Computers and Technology, 10.12.2021 21:20