1 point
A fluid power system operates at 100 psi and produces a fast, sudden
much larger outp...
Engineering, 16.04.2021 18:40 torresnoemi899
1 point
A fluid power system operates at 100 psi and produces a fast, sudden
much larger output force compared to the input. Which of the following
BEST describes the fluid power system?*
A hydraulic system with a short length, large area input cylinder and a long length,
small area output cylinder
A hydraulic system with a long length, small area input cylinder and a short length,
large area output cylinder.
O
A pneumatic system with a long length, small area input cylinder and a short length,
large area output cylinder
A pneumatic system with a short length, large area input cylinder and a long length,
small area output cylinder
Ok
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Computers and Technology, 19.07.2019 01:10