Engineering, 13.04.2021 07:30 alex12354

Match the following parts of a crane with the part name by selecting the
corresponding number.
Boom head or tip section
Auxiliary or
whip line
Headache bal
or overhaul ball
S.
Deflector (lder) sheaves
2
Main hoist line
1.
3
>
e the
- Main hoist line or falls
2.
Q
Audiary hoist line
5
3.
Boom head tip or
sheaves
nust
4.
Counterweight
Boom pendants (stays)
5.
Load block or main
hook block
Bridie
his
Upperrors or superstructure
refers to the entire crane
structure above the
Swing circle
6.
Live Mast
Boom hoistreering
Boom stops or backstops
7.
Hool, base, but or boom foot section
erect
Lattice boom insert or
sections
Swing circle, ring goar, role path or tumtable
001000
Carrier
Center pin, cater of rotation is of rotation

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

You know the right answer?

Match the following parts of a crane with the part name by selecting the
corresponding number...

Questions