subject
Engineering, 12.04.2021 23:10 clairajogriggsk

A helicopter gas turbine requires an overall compressor pressure ratio of 10 : 1. Thisis to be obtained using a two-spool layout consisting of a four-stage axial compressorfollowed by a single-stage centrifugal compressor. The polytropic efficiency of the axialcompressor is 92 percent and that of the centrifugal is 83 percent. The axial compressor has a stage temperature rise of 30 K, using a 50 percent reactiondesign with a stator outlet angle of 200. If the mean diameter of each stage is 25.0 cmand each stage is identical (assume inlet guide vanes are present to give the requiredpre-whirl), calculate the required rotational speed. Assume a work-done factor of 0.86and a constant axial velocity of 150 m/s. Assuming an axial velocity at the eye of the impeller, an impeller tip diameter of 33.0cm, a slip factor of 0.90 and a power input factor of 1.04, calculate the rotational speedfor the centrifugal compressor. Ambient conditions are 1.01 bar and 288 K.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A helicopter gas turbine requires an overall compressor pressure ratio of 10 : 1. Thisis to be obtai...
Questions