subject
Engineering, 09.04.2021 01:00 bee1538

Steam undergoes an isentropic expansion process at 80 bar, 440°C enters a piston-cylinder assembly operating at steady state with mass flow rate 20 kg/s. It exits with a pressure of 0.7 bar and a quality of 95%, assume the process is adiabatic, neglect kinetic and potential energy. a. Determine the final temperature.
b. Determine the power developed in kW.
c. Plot T-s diagram

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
Steam undergoes an isentropic expansion process at 80 bar, 440°C enters a piston-cylinder assembly...
Questions
question
Chemistry, 04.05.2021 07:50
question
Spanish, 04.05.2021 07:50
question
Medicine, 04.05.2021 08:00