Engineering, 08.04.2021 19:40 chutcherson020
Select True/False for each of the following statements regarding copper & copper alloys:: (a) Copper has a higher elastic modulus than aluminum. (b) The density of copper is closer to that of aluminum than it is to iron. (c) Bronze is an alloy of copper and zinc. (d) Copper and its alloys form a green tarnish over time, consisting of sulfides and carbonates. (e) Copper is relatively resistant to corrosion by neutral and even mildly basic water, making it useful for freshwater plumbing applications.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
Select True/False for each of the following statements regarding copper & copper alloys:: (a) Co...
Questions
History, 30.11.2020 04:30
English, 30.11.2020 04:30
Mathematics, 30.11.2020 04:30
Advanced Placement (AP), 30.11.2020 04:30
Mathematics, 30.11.2020 04:30
English, 30.11.2020 04:30
Social Studies, 30.11.2020 04:30
Chemistry, 30.11.2020 04:30
English, 30.11.2020 04:30
Computers and Technology, 30.11.2020 04:30
