Engineering, 06.04.2021 04:40 ashleymarina

A total feed of 200 mol/h having an overall composition of 42 mol % heptane and 58 mol % ethyl benzene is to be fractionated at 101.3 kPa pressure to give a distillate containing 97 mol % heptane and a bottoms containing 1.1 mol % heptane. The feed enters the tower partially vaporized so that 40 mol % is liquid and 60 mol % is vapor. Equilibrium data are given. Calculate the following: A) Moles per hour distillate and bottoms.
B) Minimum reflux ratio Rm.
C) Minimum steps (theoretical trays) at total reflux.
D) Theoretical number of trays required for an operating reflux ratio of 2.2:1.
E) The composition of the streams entering and leaving stage 2 and the composition of the streams entering and leaving the last stage in the column.
Temperature
K oC xH yH K oC xH yH
409,3 136.1 0 0 383.8 110.6 0.485 0.730
402.6 129.4 0.08 0.230 376.0 102.8 0.790 0.904
392.6 119.4 0.250 0.514 371.5 98.3 1.000 1.000

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

You know the right answer?

A total feed of 200 mol/h having an overall composition of 42 mol % heptane and 58 mol % ethyl benze...

Questions