Engineering, 06.04.2021 03:40 TJxx187
Two dogbone specimens of identical geometry (same gauge lengths and cross-sectional areas) but made of two different materials: steel and aluminum are tested under tension at a fixed load rate. If the displacement rate needed to achieve the specified load rate for aluminum specimen is 0.001 inch/min, determine the displacement rate that must be applied on the steel specimen to achieve the specified load rate. Given, Young's modulus (E) of steel is 29,000 ksi and that of aluminum is 10,000 ksi.
Answers: 1
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 06.07.2019 03:20
What is the strain energy stored in a solid uniformly circular shaft of length 3.0 m and diameter 120 mm when subject to pure torsion if the maximum shear stress is 40 mpa? g-80gpa
Answers: 1
Engineering, 06.07.2019 04:10
Natural gas (95 percent methane and 5 percent ethane by volume) flows through a 90 cm diameter pipeline with a velocity of 3 m/s. the pressure in the pipeline is 700 kpa, and the temperature is 15°c. calculate: (a) the mass and volumetric flow rates in this pipe.
Answers: 1
Two dogbone specimens of identical geometry (same gauge lengths and cross-sectional areas) but made...
English, 10.04.2020 03:19
Mathematics, 10.04.2020 03:19
Mathematics, 10.04.2020 03:19
English, 10.04.2020 03:19
Mathematics, 10.04.2020 03:19
Mathematics, 10.04.2020 03:19