subject
Engineering, 05.04.2021 14:00 caromaybelline71

The inside of the cylindrical tank with diameter D and height h is completely filled with liquid. The liquid in the tank is on the pipe with a diameter d. It is discharged with Q flow rate by opening the valve. (u =√¯2gℎ)
a) 10 minutes after the tank started to be emptied, the engineer asked the worker how many minutes after the tank would be completely emptied. The worker replied to the engineer by saying "25% of the tank is emptied, after 30 minutes the tank will be completely emptied". Would you believe the worker, why?
b) Derive the expression that indicates the change of the liquid level in the tank over time if the 2Q flow rate is started to be fed to the tank inlet.


The inside of the cylindrical tank with diameter D and height h is completely filled with liquid. T

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
The inside of the cylindrical tank with diameter D and height h is completely filled with liquid. Th...
Questions
question
English, 27.01.2020 17:31
question
Chemistry, 27.01.2020 17:31
question
Mathematics, 27.01.2020 17:31
question
History, 27.01.2020 17:31