subject
Engineering, 29.03.2021 23:40 johnsonkia873

Design the two one-way slab S1, each with a dimension of 12 ft x 40 ft. Given the following conditions: • f ’ c = 4,000 psi; f y = 60,000 psi • Unit weight of concrete is 150 lbs/cu. ft • The slab carries a service live load of 100 lbs/sq. ft ; and a service dead load of 120 lbs/sq. ft (without including the weight of the slab) • Design the two S1 slabs and provide the sketch of your reinforcement

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
question
Engineering, 04.07.2019 19:20
A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.
Answers: 2
question
Engineering, 06.07.2019 02:30
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
You know the right answer?
Design the two one-way slab S1, each with a dimension of 12 ft x 40 ft. Given the following conditio...
Questions