Engineering, 29.03.2021 22:30 Reebear8372
g A fully penetrating 12 in well has a pumping rate of 800 gpm in an unconfined aquifer. The surface elevation is 100 ft above an impervious layer. The pumping well has a water level below the ground surface of 30 ft. An observation well 1000ft away has a water level below the surface of 15 ft. What is the average permeability (ft/day) of this aquifer
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
You know the right answer?
g A fully penetrating 12 in well has a pumping rate of 800 gpm in an unconfined aquifer. The surface...
Questions
Chemistry, 30.05.2020 12:59
Biology, 30.05.2020 12:59
Mathematics, 30.05.2020 12:59
Geography, 30.05.2020 12:59
Chemistry, 30.05.2020 12:59
Mathematics, 30.05.2020 12:59
