Engineering, 26.03.2021 17:20 falabit

The initial piezometric head in a confined aquifer, which has a thickness of 11.6 m, is 85.7 m above sea level. A well with a radius of 0.5 m pumps at a constant rate of 1,240 m3/day. After the cone of depression has achieved equilibrium (i. e., steady-state), the piezometric heads at two observation wells 40 m and 95 m from the pumping well are measured as 78.9 m and 83.4 m above sea level, respectively. Also, the piezometric head in the pumping well during equilibrium remains at 46.6 m. Determine (a) the aquifer transmissivity, (b) the radius of influence of the pumping, and (c) the total well losses in and around the pumping well.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

You know the right answer?

The initial piezometric head in a confined aquifer, which has a thickness of 11.6 m, is 85.7 m above...

Questions