subject
Engineering, 24.03.2021 17:50 anonymous1813

Precast concrete circular piles with 1 ft diameter will be driven through water into a lakebed to support a pier. The soils in the lakebed consist of 10 ft of very soft clay with the undrained shear strength of 300 psf overlying 50 ft of stiff clay with the undrained shear strength of 1800 psf. The foundations will be installed to a penetration depth of 40 ft from the lakebed surface. The average gravimetric water contents of the soft clay and stiff clay are 30% and 25%. a. Estimate the buoyant unit weight values for the clay layers. Explain any assumptions. (10)
b. Using Tomlinson's charts (1971), identify the value of a for the lower stiff clay layer. Note that the value of a for the very soft clay should be 1. (10)
c. Draw a plot of the effective stress and the side shear stress as a function of depth from the soil surface up to a depth of 40 ft. Please put scales/labels on the axes and show numerical values. Show all calculations to justify the shape of these curves. (10)
d. Calculate the end bearing resistance of the pile and use your answer from part b to calculate the total side shear resistance of the pile. Use these values to calculate the total axial resistance of the pile, neglecting the self-weight of the pile. (20)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
Precast concrete circular piles with 1 ft diameter will be driven through water into a lakebed to su...
Questions
question
English, 23.10.2019 21:00
question
Social Studies, 23.10.2019 21:00
question
Mathematics, 23.10.2019 21:00
question
Social Studies, 23.10.2019 21:00
question
Mathematics, 23.10.2019 21:00