subject
Engineering, 22.03.2021 21:20 RiyaTailz3346

Saturated (this is an approximation) refrigerant at 0.05 kg/s enters the condenser at a temperature of 56oC and a specific enthalpy of 275,000 J/kg and leaves as a saturated liquid with a specific enthalpy of 130,000 J/kg. What is the temperature of this revised flow rate of air at the outlet (downstream) of the condenser, i. e., the air temperature at the inlet to the radiator

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
You know the right answer?
Saturated (this is an approximation) refrigerant at 0.05 kg/s enters the condenser at a temperature...
Questions
question
Mathematics, 09.07.2019 03:00
question
Mathematics, 09.07.2019 03:00