Engineering, 19.03.2021 19:00 Crxymia

A watershed in the neighborhood of Holly Springs has a total drainage area of 500 acres with an average slope of 0-3%. The soil is clayey loam (Soil group - C) with different land use types comprising 30% open spaces (CN = 74), 20% commercial business areas (CN = 94), 20% residential areas (CN = 83) and the rest of the land being wooded (CN = 74). Residential area is typically a single family home with a lot size of 0.25 acres. Assume 'g' = 232 and 'h' = 23 for the IDF curve. Based on this information, estimate the average discharge that would occur from the watershed over 8 hours. Also estimate the runoff depth, infiltration and average discharge at an increment of 2 hours over 8 hours.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

You know the right answer?

A watershed in the neighborhood of Holly Springs has a total drainage area of 500 acres with an aver...

Questions