Engineering, 10.03.2021 02:00 Nobleufia

Q: A city of 200,000 people disposes of 1.05 ms of treated sewage that
still has a BODu of 28.0 mg . L and 1.8 mg. Ll of Do into a river.
Upstream from the outfall
, the river has a flow rate of 7.08 ms and
velocity of 0.37 m. st. At this point, the BODu and Do in the river are 3.6
and 7.6 mg . L , respectively. The saturation value of Do ( at the
temperature of the river ) is 8.5 mg. L. The deoxygenation coefficient, ka
is 0.61 day, and the reaction coefficient k is 0.76 day! Assume
complete mixing and that the velocity in the river is the same upstream and
downstream of the outfall.
1- What is the oxygen deficit and the BODu just downstream from the
outfall (just after mixing, before any reaction can occur)?
2- What is the DO 16 km downstream?
3- Calculate the critical time and distance.
4- What is the minimum DO?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

You know the right answer?

Q: A city of 200,000 people disposes of 1.05 ms of treated sewage that
still has a BODu of 28....

Questions