subject
Engineering, 06.03.2021 01:00 Tyrant4life

Delicious Catering Services (DCS) has won a contract to provide catering services to two mining companies: Mine A and Mine B Management of DCS is faced with the challenge of deciding the mix of two modes of transporting foodstuff to the two mines. The rwo modes of transport are mini-bus and tuck. A truck transport services compeny has offered to make up to 10 truck tips per month at a cost of $2,500 and $2,000 per inp to Mine A and Mine B respectively. There are a number of mini-bus services available which can offer up to 24 inps per month at a cost of $1.200 per trip and $1,000 pes trip to Mine A and Mine B respecuvely. Each truck can carry 4 tonnes of foodstuff per inp and each mini-bus can carry 2 tonnes per trip Provision of catering services at the mines is such that at least 48 tonnes of foodstuff are

required per month and the food stuff requ rement at Mine B is at most 2/3 that at Mine A per month, Also the foodstuff delivered monthly to Mine A should be at least 8 tonnes more thart

that delivered at Mine B

Due to mechanical breakdowns and the effect of weather, only 80% and 85% of trucks arrive

on time to deliver foodstuff at Mine A and B respectively However mimi-buses are more Telrable with 90% and 95% armving on time at Mine A and Mine B respectively. DCS has set

a standard that at jeast 90% of all trips must arrive on ume no matter the mix of mode of

transport chosen DCS has allocated a monthly budget of up to $18,000 and $12,000 for

transportation to Mine A and Mine B respectively. Management of DCS desires to know the

mix of trips of the two modes of transport to Mines A and B at the minimum monthly cost. mer

Formulate thts as a linear programming model.​

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
Delicious Catering Services (DCS) has won a contract to provide catering services to two mining comp...
Questions
question
Biology, 07.04.2020 20:34