subject
Engineering, 02.03.2021 02:00 sherylpoche23

1) A hydraulic cylinder is used to lift a 6000 Ibs load straight up 1 foot in 2 seconds. The bore diameter of the cylinder is 3.5 in. The maximum system pressure is 1000 psi. A hydraulic pump that runs at 1750 rpm is used to provide the required flow rate. Assuming the pump has a volumetric and total efficiency of 85% and 80%, respectively, calculate a) the actual and theoretical pump delivery (gpm). (7 points) b) the pump volumetric displacement (in3 /rev). (3 points) c) the maximum power input to the pump (hp). (5 points

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
1) A hydraulic cylinder is used to lift a 6000 Ibs load straight up 1 foot in 2 seconds. The bore di...
Questions
question
Computers and Technology, 31.07.2019 13:30