Simulate the same two circuits in multisim using 1N914 diodes. Find the ripple voltage, conduction time interval, and peak inverse voltage. Take screenshots for prelab report. Compare the results of your simulations with your calculated values. A sample file is provided for each circuit, however the parameters must be changed. Note that the sample file contains two circuits. Either can be used. However, one of the circuits is connected to simulated versions of the instruments used throughout the rest of the lab.

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed