Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
What does air quality measure?...
Social Studies, 19.01.2020 23:31
Mathematics, 19.01.2020 23:31
Chemistry, 19.01.2020 23:31
History, 19.01.2020 23:31
English, 19.01.2020 23:31
Physics, 19.01.2020 23:31
Mathematics, 19.01.2020 23:31
Mathematics, 19.01.2020 23:31
Mathematics, 19.01.2020 23:31
Mathematics, 19.01.2020 23:31
Chemistry, 19.01.2020 23:31
Biology, 19.01.2020 23:31