Engineering, 22.02.2021 19:10 leomessifanboy678

1) Formulate a diet by hand for a 100 lb pig using corn, SBM (47.5% CP) and corn DDGS. Balance the diet to meet the CP requirement. Include corn DDGS in the diet at a concentration of 20%. Leave 3% space for macro-mineral sources and premixes. Ingredient % of Diet Corn SBM, 47.5% CP Corn DDGS Space 2) Check your answers using Microsoft Excel.
3) What is the phosphorus concentration in this diet?

Answers: 2

Show answers

Another question on Engineering

Engineering, 06.07.2019 03:10

Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air

Answers: 1

Answer

Engineering, 06.07.2019 03:10

Consider two concentric spheres forming an enclosure with diameters of 12 cm and 18 cm the spheres are maintained at uniform temperatures ti-50°c and t2 = 250°c and have emissivities .45 and .8, respectively. determine the net rate of radiation heat transfer between the two spheres per unit surface area.

Answers: 1

Answer

Engineering, 06.07.2019 03:20

What is the strain energy stored in a solid uniformly circular shaft of length 3.0 m and diameter 120 mm when subject to pure torsion if the maximum shear stress is 40 mpa? g-80gpa

Answers: 1

Answer

Engineering, 06.07.2019 04:10

Along steel shaft of 10 cm diameter is austenised at 870°c and then quenched in a liquid at 30oc. the average surface heat transfer coefficient is 2000 w/m2. °c. the relevant thermophysical properties of the shaft are: p=7800 kg/m", k=20 w/mk, cp=0.46 kj/kg.k calculate: a)-the time required for the center temperature to drop to 200°c. b)-the temperature at half-radius at that moment. c)-the amount of heat that had been transferred to the liquid by that time per meter length of the shaft

Answers: 1

Answer

You know the right answer?

1) Formulate a diet by hand for a 100 lb pig using corn, SBM (47.5% CP) and corn DDGS. Balance the d...

Questions