Engineering, 21.02.2021 14:40 5001Je
For a nozzle-duct system shown in Fig Q3, the nozzle is designed to produce a Mach number of 2.8 with y = 1.4, The inlet conditions are pos= 10 bar and T = 370 K. The duct is 8 diameters in length, but the duct friction factor is unknown. The receiver pressure is fixed at 3 bar and a normal shock has formed at the duct exit.<br /><br />(a) Determine the friction factor of the duct. (b) What is the total change in entropy for the system?​
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
Engineering, 06.07.2019 02:30
Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.
Answers: 3
You know the right answer?
For a nozzle-duct system shown in Fig Q3, the nozzle is designed to produce a Mach number of 2.8 wit...
Questions
Mathematics, 24.03.2022 22:20
Social Studies, 24.03.2022 22:20
Mathematics, 24.03.2022 22:30
Mathematics, 24.03.2022 22:30
