Engineering, 19.02.2021 02:40 drashanhparekh123

An industrial plant consists of several induction motors. The plant absorbs 800KW at 0.8 power factor lagging from the substation bus. a) Compute the required KVAR rating of the capacitor connected across the load to raise the power factor to 0.95 lagging or better. b) A 200-hp, 90% efficiency, synchronous motor is added to from the same bus at rated condition and 0.8 power factor leading. Calculate the resulting power factor.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

Answer

You know the right answer?

An industrial plant consists of several induction motors. The plant absorbs 800KW at 0.8 power facto...

Questions