Engineering, 17.02.2021 22:10 Sumitco9578
What force, in pounds, is needed to push a 50-lb weight up a 10-ft ramp to a height of 5 feet. What is the mechanical advantage of the ramp? Force = pounds MA =
Answers: 3
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
What force, in pounds, is needed to push a 50-lb weight up a 10-ft ramp to a height of 5 feet. What...
Mathematics, 13.03.2021 03:30
Engineering, 13.03.2021 03:30
Mathematics, 13.03.2021 03:30
Geography, 13.03.2021 03:30
Physics, 13.03.2021 03:30
English, 13.03.2021 03:30