subject
Engineering, 15.02.2021 19:50 nakeytrag

"In a mobile radio system (e. g., cell phones), there is one type of degradation that can be modeled easily with sinusoids. This is the case of multipath fading caused by reflections of the radio wave interfering destructively at some locations. Suppose that a transmitting tower sends a sinusoid signal, and a mobile user receives not one but two copies of the transmitted signal: a direct-path transmission and a reflected path signal (e. g. from a large building). The received signal is the sum of the two copies, and since they travel different distances they have different time delays. If the transmitted signal is s(t), then the received signal is
r(t)=s(tβˆ’t1)+s(tβˆ’t2)
In a mobile phone scenario, the distance between the mobile user and the transmitting tower is always changing. Suppose that the direct-path distance is
d1=x2+106βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆš
where x is the position of a mobile user who is moving along the x axis. Assume that the reflected-path distance is
d2=(xβˆ’55)2+106βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆš+55
The amount of the delay (in seconds) can be computed for both propagation paths, using the fact that the time delay is the distance divided by the speed of light (3 x 10^8 m/s).
Assume that the transmitted signal is
s(t)=cos(300Γ—106Ο€t)
The amplitude of the received signal is a measure of its strength. Show that as the mobile user moves, it is possible to find position where the signal strength is zero. Find one such location."
So, here's what I did:
The only thing needed from the received signal function is the amplitude, so I turn each direct and reflected signal into their phasor representation:
S1=eβˆ’jt1
S2=eβˆ’jt2
Then I sum the phasors:
S=S1+S2=eβˆ’jt1+eβˆ’jt2=cos(βˆ’t1)+cos(βˆ’t 2)+j(sin(βˆ’t1)+sin(βˆ’t2))
Then the amplitude can be achieved this way:
A=(cos(t1)+cos(t2))2+(sin(t1)+sin(t 2))2βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’ βˆ’βˆš
And make the amplitude equal to zero:
0=(cos(t1)+cos(t2))2+(sin(t1)+sin(t 2))2βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’βˆ’ βˆ’βˆš
But when I try to solve for x (in which is obtained from t = d(x)/c) using Wolfram Alpha, I got no solution. What am I doing wrong here?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60Β°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
question
Engineering, 04.07.2019 19:20
The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers
Answers: 3
You know the right answer?
"In a mobile radio system (e. g., cell phones), there is one type of degradation that can be modeled...
Questions
question
English, 09.12.2020 23:20
question
Mathematics, 09.12.2020 23:20
question
Mathematics, 09.12.2020 23:20
question
Health, 09.12.2020 23:20
question
Chemistry, 09.12.2020 23:20