subject
Engineering, 11.02.2021 17:30 76022sfox

A two-dimensional wedge with an included angle of 10◦(i. e the wedge semi-angle is5◦) is placed in a wind tunnel which has parallel walls. If the Mach number in thefreestream ahead of the wedge is 2.5, and if the center-line of the wedge is inclinedat an angle of 4◦to the direction of the air flow, find the Mach numbers upstreamand downstream of the oblique shock waves after they are reflected off the upperand lower walls of the tunnel. Also sketch the flow pattern marking the angles thewaves make to the tunnel walls.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
question
Engineering, 04.07.2019 19:20
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
You know the right answer?
A two-dimensional wedge with an included angle of 10◦(i. e the wedge semi-angle is5◦) is placed in a...
Questions