Engineering, 05.02.2021 22:00 rileymorrison5836

A bar of mild steel has a diameter of 75 mm and is placed inside a hollow aluminum cylinder ofinternal diameter 75 mmand external diameter 100 mm; both bar and cylinder are the same length. Theresulting composite bar is subjected to an axial compressive load of 1000 kN. If the bar and cylindercontract by the same amount, calculate the stress in each. The temperature of the compressed compositebar is then reduced by 150Cbut no change in length is permitted. Calculate the final stress in the bar and the cylinder if E(steel)= 200,000 N/mm^2, E(aluminum)= 80,000 N/mm^2, coefficient of linear expansion for steel= 0.0000012/C and coefficient of linear expansion for aluminum= 0.000005/C.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

You know the right answer?

A bar of mild steel has a diameter of 75 mm and is placed inside a hollow aluminum cylinder ofintern...

Questions