A brass alloy rod having a cross sectional area of 100 mm2 and a modulus of 110 GPa is subjected to a tensile load. Plastic deformation was observed to begin at a load of 39872 N. a. Determine the maximum stress that can be applied without plastic deformation. b. If the maximum length to which a specimen may be stretched without causing plastic deformation is 67.21 mm, what is the original specimen length

a) the maximum stress that can be applied without plastic deformation is 398.72 N/mm²  

b) length of the specimen is 66.97 mm

Explanation:

Given the data in the question;

a) Determine the maximum stress that can be applied without plastic deformation

when know that; maximum stress σ  = F / A

where F is the force in the rod ( 39872 N )

A is the cross-sectional area of the rod ( 100 mm² )

so we substitute;

σ  = 39872 N / 100 mm²

σ  = 398.72 N/mm²

Therefore, the maximum stress that can be applied without plastic deformation is 398.72 N/mm²  

b)  

strain in the members can be calculated using the expression

ε = σ / E

where σ is the stress in the rod

E is the module of elasticity (  110 GPa = 110000 N/mm² )

(Sl-L) / L = σ/E

where Sl-L is the change in length of the member

L is the original length of the specimen

so we substitute

(67.21 - L) / L = 398.72 / 110000

110000( 67.21 - L) = 398.72L

7393100 - 110000L = 398.72L

7393100 = 398.72L+ 110000L

7393100 = 110398.72L

L = 7393100 / 110398.72

L = 66.97 mm

Therefore; length of the specimen is 66.97 mm

answer:

look in settings

explanation: