subject
Engineering, 01.02.2021 21:40 ryanez5306

Drag the tiles to the correct boxes to complete the pairs. Which measuring device would one use for a particular scenario.

altimeter

digital micrometers

charge-coupled devices

magnetic resonance imaging

Mia wants to measure charge and convert

it into electrical signals.

arrowRight

Dr. Jerry wants to measure the damages in the

tissue of the body and thus diagnose illnesses.

arrowRight

John wants to measure the length, diameter, or

thickness of objects in mechanical engineering.

arrowRight

Mario is a pilot and wants to measure altitude of

the plane flying in the air.

arrowRight

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
You know the right answer?
Drag the tiles to the correct boxes to complete the pairs. Which measuring device would one use for...
Questions