Engineering, 31.01.2021 09:00 cheyfaye4173

A driver is traveling at 90 km/h down a 3% grade on good, wet pavement. An accident investigation team noted that braking skid marks started 75m before a parked car was
hit at an estimated 45 km/h. Ignoring air resistance, calculate the theoretical friction
coefficient.

Answers: 2

Show answers

Answers

Answer from: zalliagessnerp5fuj9

0.35

Explanation:

We resolve the component of the weight of the car along and perpendicular to the grade. We have mgsinФ and mgcosФ where Ф = angle of grade.

Now, the frictional force f = μN = μmgcosФ where μ = coefficient of friction

So, the net force along the grade is F = mgsinФ - μmgcosФ.

The work done by this force moving a distance, d along the grade is

W = (mgsinФ - μmgcosФ)d

This work equals the change in kinetic energy of the car. So ΔK = 1/2m(v₂² - v₁²) = W = (mgsinФ - μmgcosФ)d

1/2m(v₂² - v₁²) = (mgsinФ - μmgcosФ)d

1/2(v₂² - v₁²) = (gsinФ - μgcosФ)d

(v₂² - v₁²)/2d = (gsinФ - μgcosФ)

dividing through by gcosФ, we have

(v₂² - v₁²)/2dgcosФ = (gsinФ/gcosФ) - μgcosФ/gcosФ

(v₂² - v₁²)/2dgcosФ = tanФ - μ

μ = tanФ - (v₂² - v₁²)/2dgcosФ

given that tanФ = 3% = 3/100 and 1 + tan²Ф = 1/cos²Ф, cosФ = 1/(√1 + tan²Ф) = 1/(√1 + (3/100)²) = 1/(√1 + (9/10000)) = 1/(√10000 + 9/10000) = 1/√(10009/10000) = 100/√10009 = 100/100.05 = 0.9995.

Also, given that v₁ = 90 km/h = 90 × 1000/3600 m/s = 25 m/s and v₂ = 45 km/h = 45 × 1000/3600 m/s = 12.5 m/s, d = 75 m and g = 9.8 m/s².

So, substituting the values of the variables into the equation, we have

μ = tanФ - (v₂² - v₁²)/2dgcosФ

μ = 3/100 - ((12.5 m/s)² - (25 m/s)²)/(2 × 75 m × 9.8 m/s² × 0.9995)

μ = 3/100 - ((156.25 m/s)² - (625 m/s)²)/1,469.265 m²/s²

μ = 3/100 - (-468.75 m²/s²)/1,469.265 m²/s²

μ = 3/100 + 468.75 m²/s²/1,469.265 m²/s²

μ = 0.03 + 0.32

μ = 0.35

So, theoretical friction coefficient is 0.35

Answer from: Quest

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about

Answer from: Quest

Electronically let me know if that’s right .

Another question on Engineering

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

Answer

You know the right answer?

A driver is traveling at 90 km/h down a 3% grade on good, wet pavement. An accident investigation...

Questions