Engineering, 30.01.2021 14:00 martina28

**Can someone please help me solve these problems step by step, thank you! 1. If a 12-inch diameter driving Gear A has 100 tooth which turns CCW with a torque of 200 ft-lb and 100 rpm is meshed with Gear B, 25 tooth, turn along with Gear C, 50 tooth as they are a compound gear and Gear D, 150 tooth meshed with C.
-->sketch and annotate the gear train.
-->what direction does gear ratio B, C, and D turn?
-->what is the gear ratio for B, C, and D?
-->what is the angular velocity for gears B, C, and D?
-->what is the torque for gears B, C, and D?
-->what is the diameter of gears B, C, and D?

2. In a pulley system, pulley A is moving 1000 rpm and has a diameter of 18inches. There are two pulleys with different sizes, B moving ot 1575 rpm and C moving at 1850 rpm attached on a single axle.
-->sketch and annote the pulley system.
-->what is the diameter of pulley B and pulley C?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

Answer

You know the right answer?

**Can someone please help me solve these problems step by step, thank you! 1. If a 12-inch diameter...

Questions