Engineering, 30.01.2021 03:50 rileywjones0725
A 2 in. by 4 in. rectangular steel bar is used as a diagonal tension member in a bridge truss. The diagonal member is 15 ft long, and its modulus of elasticity is 30,000,000 psi. If the strain in the diagonal member is measured as 0.0012 What is the tension force in the bar?
Answers: 2
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
A 2 in. by 4 in. rectangular steel bar is used as a diagonal tension member in a bridge truss. The d...
Biology, 21.10.2020 01:01
History, 21.10.2020 01:01
Social Studies, 21.10.2020 01:01
Mathematics, 21.10.2020 01:01
History, 21.10.2020 01:01
Spanish, 21.10.2020 01:01
Mathematics, 21.10.2020 01:01
Mathematics, 21.10.2020 01:01
Mathematics, 21.10.2020 01:01