Engineering, 21.01.2021 22:30 pc103919
What would the mixed-air temperature be for a system with 20 percent outdoor air if the outdoor air temperature is 10 degrees Fahrenheit and the return-air temperature is 75 degrees Fahrenheit
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
What would the mixed-air temperature be for a system with 20 percent outdoor air if the outdoor air...
Questions
Mathematics, 10.07.2019 16:00
Spanish, 10.07.2019 16:00
Mathematics, 10.07.2019 16:00
Computers and Technology, 10.07.2019 16:00
Biology, 10.07.2019 16:00
