Engineering, 18.01.2021 14:00 carrietaylor234
A medium drive of a steel hub of a gear with an outside diameter of 80 mm on a steel shaft is required. a) Make the dimensional decisions for a 49-mm basic size with a medium drive fit for the hub and shaft, and specify dimensions with tolerances for the shaft and the hub bore for the fit. b) When the interference pressure “p” is at a minimum (p at δmin) for the specified tolerances how much torque (in Nm) can be transferred with the medium drive fitted assembly if the steel to steel friction is 0,8 and the hub of the length is 170 mm. E=207 GPa
Answers: 3
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
A medium drive of a steel hub of a gear with an outside diameter of 80 mm on a steel shaft is requir...
Mathematics, 24.01.2021 14:00
Biology, 24.01.2021 14:00
English, 24.01.2021 14:00
Mathematics, 24.01.2021 14:00
Mathematics, 24.01.2021 14:00
Mathematics, 24.01.2021 14:00
Computers and Technology, 24.01.2021 14:00
Arts, 24.01.2021 14:00
Chemistry, 24.01.2021 14:00
Mathematics, 24.01.2021 14:00
Social Studies, 24.01.2021 14:00
History, 24.01.2021 14:00