Engineering, 12.01.2021 19:00 sincere21
D) Write how you would use the multi-meter on a stripboard to check that there is a continuity between 2 tracks. someone can help me plss
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
D) Write how you would use the multi-meter on a stripboard to check that there is a continuity betwe...
History, 28.11.2021 23:10
Geography, 28.11.2021 23:10
Health, 28.11.2021 23:10
Advanced Placement (AP), 28.11.2021 23:10
Mathematics, 28.11.2021 23:10
Mathematics, 28.11.2021 23:10
Physics, 28.11.2021 23:10
Chemistry, 28.11.2021 23:10
Biology, 28.11.2021 23:10