Engineering, 08.01.2021 17:20 isabel81ie
Look for a professional code of conduct in your own area of engineering (besides the NSPE) and answer the following questions:
a) Is the code vague at some points? Where?
b) Are their potential contradictions between the provisions of the code? Does the code contain provisions to deal with these contradictions?
c) Are there any provisions that are impossible to live by? Which ones?
d) Do you agree with the list of professional responsibilities set out in the code? Why or why not?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
Look for a professional code of conduct in your own area of engineering (besides the NSPE) and answe...
Questions
Mathematics, 07.12.2019 03:31
Mathematics, 07.12.2019 03:31
Mathematics, 07.12.2019 03:31
Mathematics, 07.12.2019 03:31
Mathematics, 07.12.2019 03:31
English, 07.12.2019 03:31
Mathematics, 07.12.2019 03:31
Mathematics, 07.12.2019 03:31
Social Studies, 07.12.2019 03:31
