Engineering, 03.01.2021 19:10 tiwaribianca475
is used to change physical objects and 3-D ideas into 2-D drawing that effectively describe the design and features of an object, so the object can be documented and manufactured.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
is used to change physical objects and 3-D ideas into 2-D drawing that effectively describe the desi...
Questions
Chemistry, 02.12.2019 21:31
Social Studies, 02.12.2019 21:31
Mathematics, 02.12.2019 21:31
Mathematics, 02.12.2019 21:31
Mathematics, 02.12.2019 21:31
Mathematics, 02.12.2019 21:31
Chemistry, 02.12.2019 21:31
Spanish, 02.12.2019 21:31
Mathematics, 02.12.2019 21:31
Biology, 02.12.2019 21:31
