Engineering, 27.12.2020 16:50 Otod207
Longitudinal tensile strength tests on an aligned glass fiber/epoxy matrix composite with 0.4 volume fraction of discontinuous fibers with average diameter and length of 0.1 and 6 mm respectively showed that (i) the fracture strength of the fiber is 3.5 x 103 MPa; (ii) the matrix stress at composite failure is 5.5 MPa and that (iii) the fiber-matrix bond shear strength is 100 MPa. Estimate the composite tensile strength.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 19:20
The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal
Answers: 3
Engineering, 06.07.2019 02:30
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
You know the right answer?
Longitudinal tensile strength tests on an aligned glass fiber/epoxy matrix composite with 0.4 volume...
Questions
History, 21.01.2021 22:10
Social Studies, 21.01.2021 22:10
Chemistry, 21.01.2021 22:10
History, 21.01.2021 22:10
Mathematics, 21.01.2021 22:10
