Calculate the infiltration rate and cumulative infiltration for a sandy clay soil using the Green-Ampt method. The soil has a porosity of 0.430, suction head of 23.90 cm, hydraulic conductivity of 0.06 cm/hr, and initial porosity of 0.225. Perform the calculation at an 1-hour increment up to 4 hours from the beginning of the infiltration. Assume continuous ponding.

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.