How many LEED points are possible in the Indoor Environmental Quality category for each of the following situations: A garage is not constructed A fireplace is not installed A shoe removal and storage space is near the primary entryway, separated from living areas without conventional carpet At least 90% of the site-applied paints and coatings, flooring, insulation, and site-applied adhesives and sealants have been tested and meet the requirements of CA Section 01350

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater