Engineering, 17.12.2020 19:40 highschoolboy
When you look at a drawing, how do you know if you are looking at US
Customary or Si measurements? Why is it important for an engineer to know this
piece of information?
Answers: 3
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
When you look at a drawing, how do you know if you are looking at US
Customary or Si measurements?...
History, 26.06.2019 08:30
History, 26.06.2019 08:30
Mathematics, 26.06.2019 08:30
Mathematics, 26.06.2019 08:30
Mathematics, 26.06.2019 08:30
Social Studies, 26.06.2019 08:30
Mathematics, 26.06.2019 08:30
Social Studies, 26.06.2019 08:30
Mathematics, 26.06.2019 08:30
History, 26.06.2019 08:30
Biology, 26.06.2019 08:30